The launcher is replicated 1:1 scale from the M203A1– with a few tweaks to include an AFG. (Photos: Sunny Burns/U.S.Army)
RAMBO (Rapid Additively Manufactured Ballistics Ordnance) was made on a 3D printer after a six-month effort — and has even fired 3D printed grenades to prove it works.
Produced in a joint collaboration between the U.S. Army Research, Development and Engineering Command, the U.S. Army Manufacturing Technology Program and America Makes, the group used additive manufacturing techniques to craft a direct copy of the M203A1 40mm grenade launcher commonly mounted under the M16/M4 series rifles.
Every part of the weapon, save for the springs and some fasteners, was sintered in aluminum or printed in 4340 alloy steel in 35 hours of production.
RAMBO, top, and the standard M203A1, bottom
An M203A1 grenade launcher consists of about 50 parts, 90 percent of which the ARDEC team were able to 3D print for their weapon
So what do you fire from a 3D printed bloop gun? 3D printed grenades, that’s what.
While the M781 low-velocity 40mm training grenade uses a zinc case which they couldn’t print, the team tried 3D printing grenade bodies in aluminum and steel then settled on using a wax printer to make a mold they could pour molten zinc into to cast the projectile bodies.
The team tried several different printed versions of the M781 grenade
The neat thing is that the process actually cost, “tens of thousands of dollars less than identical components created with standard production methods.”
But does it work?
Well, they shot RAMBO 15 times and found the “test shots did not produce any signs of degradation, and the rounds’ muzzle velocities were within 5% of the velocities achieved by standard launchers.”
A standalone kit complete with a printed adjustable buttstock, mounts, and other modifications to include an angled forward grip was printed after consulting paratroopers of the 82nd Airborne Division who looked at the prototype– another rapidly applied lesson translated to production of the finished launcher.
The post The Army has 3D printed a working 40mm grenade launcher they call Rambo (PHOTOS) appeared first on Guns.com.