Gunsite Writers’ Conference, 2nd Day Report

By John Farnam

Robar Roguard Firearms Finish
Robar Roguard Firearms Finish
Defense Training International, Inc
Defense Training International, Inc

Ft Collins, CO –-(Ammoland.com)- Today, we learned about coatings and metal treatments. Then, we went to the range and shot 1911s all afternoon. It felt good to be carrying a 1911 again, even though, when I left the range, I was carrying my Walther PPQ!

Observations:

All metal treatments, even high-tech ones, have “side-effects.” Nothing is perfect!

For external guns surfaces, polymer is a good choice. Robar’s version is Roguard or Poly-T-Two. Both are very acceptable, and can be an any color.

Also suitable for external surfaces is QPQ, otherwise known as Tennifer or Melonite. Very hard. Also very suitable for rifle bores. However, it is so hard that subsequent machining is nearly impossible!

For internal parts, NP3 is the way to go. NP3 has integral teflon, which gives it natural lubricity. However, it is slick and thus not the best choice for slides. And, it has a silver/grey color. Other colors are not possible.

“Hard chrome” plating is obsolete. There are superior choices for surface treatment today. Hard-chrome barrels are notoriously inaccurate, because of inherent unevenness of the plating.

Nickel plating is also mostly obsolete. It is of interest only by those who want “shiny” guns.

Ceramic coating (Cerakoat) has excellent high-heat tolerance and are thus suitable for some parts of full-auto guns. However, ceramic has no inherent lubricity.

Smoking and coffee-drinking lowers blood PH, making bodily fluids, particularly sweat, acidic and thus corrosive to pistols worn close to the skin. Smokers and coffee-drinkers typically have to deal with rusty guns, even in dry climates! They will particularly benefit from modern, high-tech metal treatments.

Chip McCormick 1911 Magazines
Chip McCormick 1911 Magazines

7-round 1911 magazines, particularly those by Colt and Chip McCormick, and subsequently treated with NP3, run best. No problems in any of the guns we used. 8-round magazines, treated or not, did not run well!

For one, I was more accurate today shooting 1911s than I was yesterday shooting Glocks, even those with the wonderful Overwatch trigger! I surely like the magazine capacity of G19s, et al, but the longer sight radius of the five-inch 1911 made a significant difference. No doubt!

ARs tomorrow!

/John

About John Farnam & Defense Training International, Inc
As a defensive weapons and tactics instructor John Farnam will urge you, based on your own beliefs, to make up your mind in advance as to what you would do when faced with an imminent and unlawful lethal threat. You should, of course, also decide what preparations you should make in advance, if any. Defense Training International wants to make sure that their students fully understand the physical, legal, psychological, and societal consequences of their actions or inactions.

It is our duty to make you aware of certain unpleasant physical realities intrinsic to the Planet Earth. Mr Farnam is happy to be your counselor and advisor. Visit: www.defense-training.com