Cactus Tactical -Answers the Question, What is the Best Bullet Weight & Long Range Shooting Secrets?
USA – -(Ammoland.com)- The twist rate of the barrel determines the best bullet weight for your gun and is the single, most important factor for rifle accuracy (see linked twist rate tool).
The manufacturer cuts the rifling to a twist rate that will stabilize the bullet designed and tested for that cartridge. The smaller the bore diameter, the more difficult it is to stabilize a bullet.
Heavy bullets cannot be driven to the same velocities as lighter bullets in the same barrel, so they are also not spinning as fast leaving the muzzle and may not stabilize down range. Bullet spin is a product of twist rate and velocity. A sure sign of a bullet not spinning fast enough is a target with oval or keyhole hits. Using a light bullet in a fast twist rate barrel may cause the bullet to skip across the rifling and literally file itself, thus larger groups. Excess copper residue in the barrel is a clue.
Try to duplicate factory loads. They have been extensively tested for best results. Matching the bullet weight to the twist rate and velocity is essential for accuracy. If you need a heavier bullet than your twist rate will handle, you are probably using the wrong rifle.
Bullet Weight Bullet Parameters:
Besides weight, there are five measurements that should be considered when selecting a bullet.
- Sectional Density: A weight to length ratio measurement. The longer and heavier the bullet, the higher the sectional density thus the deeper it will penetrate. This parameter is not important for target and varmint loads but is very important for game hunting loads.
- Ballistic Coefficient (BC): The higher the BC, the more aerodynamic the bullet, thus it will drop less at long ranges and will be less affected by cross winds. Due to air density, small diameter bullets such as a .224″ typically have poor BCs. 6mm bullets and larger start getting higher BCs. A BC of .400 is considered very good, .500 and higher is excellent.
- Balance: All rifle bullets are heavier in the rear than the front and therefore are naturally unstable. The more balanced, the more stable it will be.
- Bore Surface: is the length of the bullet that actually touches the bore. The longer the bore surface, the more it dampens effects from bullet jump shock and the more stable the bullet will be going down the barrel. This parameter is very important for accuracy.
- Ogive: is the point on the nose where the bullet first measures full diameter. This important parameter will dictate bullet seating depth, bullet jump and cartridge overall length. All bullets must be seated at optimum depth for best accuracy. This usually occurs where the ogive is .010″ from the rifled bore.
Conclusion: Analyze before loading. Always stay within the bullet weight intended for your twist rate. Try to select a bullet with the longest bore surface, best balanced, shortest ogive to tip measurement, highest ballistic coefficient, and best sectional density, in that order.
A good place to start is a boat tail with a blunt nose or hollow point. Most reloading manuals list BC, sectional density, and have pictures of bullets so you can compare important parameters. Don’t skimp on bullets; buy the best quality bullets you can find. Most bullets sold in bulk packs are not uniform weight. Stay with boxes of 100. Use a Bullet Depth Gauge to determine proper bullet seating depth. Bullet Depth Gauges are available in all cartridges with .224, 7mm, and .308 diameter bullets. These tools are very easy to use and come with simple instructions. Unfortunately, they are only available for guns with direct in-line chamber access such as a bolt action, single shot, AR-15, etc.
Rifle Twist Rates
Caliber – Twist Rate – Bullet Weight
.172
1:10 all weights
.222 Rim Fire
1:16 all weights, lead bullets
.224 / 5.56mm
1:16 up to 55 grains, 4300 fps or more
1:15 up to 55 grains, 4100 – 4300 fps
1:14 up to 55 grains, less than 4100 fps
1:12 55 – 63 grains
1:9 63 – 70 grains
1:8 70 grains or more
.243 / 6mm
1:15 up to 70 grains
1:14 70 – 75 grains
1:13 75 – 85 grains
1:12 85 – 100 grains
1:10 100 grains or more
.257
1:14 up to 70 grains
1:13 70 – 80 grains
1:12 80 – 90 grains
1:10 90 – 100 grains
1:9 100 grains or more
.264 / 6.5 mm
1:9 up to 130 grains
1:8 130 grains or more
.270
1:10 all weights
.284 / 7mm
1:11 up to 140 grains
1:10 Magnum velocities
1:9.5 140 grains or more
.308 / 7.62mm
1:15 up to 150 grains
1:14 150 – 168 grains
1:12 168 – 170 grains
1:10 170 – 220 grains
1:8 220 grains or more
.311 / 7.65 mm
1:10 all weights
.321
1:16 all weights
.323 / 8mm
1:10 all weights
.338
1:10 all weights
.348
1:12 all weights
.358
1:12 all weights
.375
1:12 all weights
.411
1:14 all weights
.416
1:14 all weights
.429
1:38 all weights
.458
1:20 all weights up to 2000 fps
1:14 all weights above 2000 fps
About Cactus Tactical
Cactus Tactical Supply was formed in 1999 to support Phoenix, AZ customers of various firearms training facilities with their tactical equipment and ammunition supplies. They soon began serving local law enforcements agencies and military organizations as a natural extension of the original business charter. It was a small step after that to go nationwide via the Internet and provide a 24 hour web store to allow law enforcement officers, military personnel, tactical enthusiasts and the armed savvy civilian to buy their equipment at reduced prices. Expansions into mail order and store front customer capabilities have followed over the last few years. Cactus Tactical carries most of the top brands of equipment that are designed for hostile environments. The internet accessible web store currently displays over 3,000 individual items for immediate purchase.
Cactus Tactical is headquartered in Phoenix, Arizona, USA. For more information on Cactus Tactical and Cactus Tactical products, log on to www.cactustactical.com or call 602-441-3924.